MOTORCYCLES & PARTS

MOTORCYLES & PARTS!! Service and repair. Customising, and complete builds

Thursday, June 9, 2011

firetruck fabrication

 inside tool compartment. this is beind the drivers seat. I took out the rear passenger seat to build this compartment. this is corolla's 4x4 pump and roll engine.


 fabricated this window guard to kep tools from breakin the window.
 lower door panel with lighting and emergency light.
 overall view of tool compartment.
 this is the inside of the cab. this wal is the inside view of the tool compartment.

 this is the center console that I fabbed.
 this is corolla's 4x4 pump and roll. they will be able to cruz down the beach while shooting out water.


 this is a ram extender holder I fabricated.


this is above the pump and crosslays. I fabbed the lid for the exhaust, the storage area, and crosslays.

my wifes 79 cafe rebuild










tearin it down!!!

Sunday, May 29, 2011

rebuildin the wifes cafe!!





tearin it down to r&r all gaskets and piston rings. deglaze cylinders. check cams and valve lash. completely rewire. in some of these pics you can see how bad the wiring was done before. im going to simplify it. I will also redo the chasis under the tail section to accomidate eletrical connectors, relays and regulator so that it's all hidden. then there will be new paint.

78 shovel build

                gettin a look at the exhaust.

 tearin it down.. next is to drill out my swing arm tab on left side to install new axle that will go all the way through the tab with a nut rather then using thread repair on the oem design.

Sunday, April 17, 2011

 neil,s shovel I think it is a 82
       he cut these apesand shortened them... good stuff

 this is my good frind neil takin her out for a stretch
 the revenge run.. another run I missed cuz im still buildin my bike!!!!

neil used my tire machine to switch to blackwalls... looks sweet!!

Friday, April 15, 2011

78 shovel build

                                      frame grinded down, sanded and polished. tank mounted.
                                        new lower fork tubes
                                         new machined swingarm axle. courtesy Tbone.
                                       cautionary note from Tbone. thanx Tbone you saved me some butt pain!!
                                      Above: new avon mk11. below: turned fork lowers also courtesy of Tbone
                                               thanx again homie!!!!!!!

Thursday, April 7, 2011





                                           my wifey's 79 honda cb750 cafe..... she lets me ride it sometimes!!